28-6-2011 23 033000=13069F
Switch appliances and dim lights remotely. Close the garage door and switch on the air-
conditioning from your bedroom. Dim lights in the hallway.
Slide switch position SEC: The lower five button combinations are used to switch the X10
modules with corresponding addresses (Unit Codes 1-5).
Use the blue button to DIM/BRIGHT lamps connected to a Lamp/Dimmer Module.
ALL LIGHTS ON: To switch on all lamp/dimmer modules with one press of a button.
ALL LIGHTS OFF: To switch off all the modules (both lamp and appliance modules) with one
press of a button.
Slide switch position 1: 1 ... 8: To switch X10 Home Automation with corresponding addresses
(UC 1-8).
Slide switch position 2: 9 ...16: To switch X10 Home Automation with corresponding addresses
(UC 9-16).
7.7 Comfort functions of the security console
You can also control the modules using the console. If you do not see a menu item, the
console is in HOME CONTROL mode. The display shows HOME CONTROL. To control a module
with Unit Code 1, press “1” followed by “ON” or “OFF”. If you want to control module 12, press
“1”, then “2”, followed by “ON” or “OFF”.
The ALL LIGHTS ON function can be send by pressing “0” followed by “ON”, the display will
show LIGHTS ON. ALL UNITS OFF can be send by pressing “0” followed by “OFF”, the display will
show ALL OFF.
7.8 Timers
The console can turn on and off lighting and appliances at pre-programmed times, so that it
appears as if you are at home, the so called LIVED IN LOOK. You can also program timed
temperature setbacks .
7.8.1 Setting the console mode
1. To access the menu, press the menu UP or menu DOWN button. The display now shows
ENTER PIN.
2. Enter your 4-digit PIN code (factory setting 0000). For every digit entered, a * will appear.
3. When the PIN code has been entered correctly, the word INSTALL will show up on the
display.
4. Use the menu buttons UP/DOWN to go to menu item 7. OPTIONS. Press OK to select this
menu item. You can also go to this menu item directly by pressing a 7 on the number pad.
5. Press “0” on the number pad. Use the menu buttons UP/DOWN to choose EURO 7 DAY.
Press OK.
6. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you
choose Yes, you will quit the menu. If you choose No, you go back to the first menu item. .
7.8.2 Setting Timers
1. To access the menu, press the menu UP or menu DOWN button. The display now shows
ENTER PIN.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). The
display is cleared and shows a * for each number entered.
3. When the PIN code has been entered correctly, the word INSTALL will show up on the
display.
4. Use the menu buttons UP/DOWN to go to menu item 9. SET TIMER. Press OK to select this
menu item. You can also go to this menu item directly by pressing a 9 on the number pad.
5. The display will read NEW TIMER. Press OK.
6. When set to 7-days mode (see 7.8.1), the display will read 1. HOME CNTRL and 2. HEAT /
COOL, select respective timer to set; either option 1 for control of lights and appliances, or
option 2 for timed temperature setbacks.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce