28-6-2011 24 033000=13069F
Use the menu buttons UP/ DOWN to check timers you previously set. The top menu
item is always called NEW TIMER, unless all 14 timer points have been set.
7. The display will read CHOOSE DAYS. Use the number keys to enter the DAYS, where
1=Monday, 2= Tuesday and so on. When the days are set, press OK.
8a). HOME AUTOMATION TIMER: The display will read UNIT NUMBER or THST. Use the
number pad to enter the UNIT CODE of the desired module (1-16) or the Thermostat nr
(1-4). Example: If you enter 12, the display will read TIMER 12 ON. The lowest line will
read " : ".
8b). TEMPERATURE SETBACK: In case the Temperature setback is chosen, an extra
choice has to be made, regarding which temperature level has to be used during the
timed event. Choose either COMFORT (which is the comfort level set to the console for
the respective thermostat), ECONOMY (setback applies for all registered Temperature
Zones), or FROST (also applies for all registered thermostats at once)
9. Enter the time you want the lights to be switched on, or the timed temperature
setback has to take place (24 hour notation). If you make a mistake, press CLEAR. Press
ON when you only want to enter the time the lights need to be switched on.
10. Press OK. The display now reads TIMER 12 OFF. The lowest line will read " : ".
11. Enter the time you want lights to be switched off or the timed temperature setback
has to stop. If you make a mistake, press CLEAR. Press OK when you do not want to
enter a switch-off time.
12. The bottom line on the display now reads 1. WEEKLY
13. Use the menu buttons UP/ DOWN to select:
1. WEEKLY: The timer setting is executed every week.
2. ONE WEEK: The timer setting is only used one week from today.
3. RANDOM: The timer setting is executed weekly, but varies within the hour
entered (if you entered 20:30, the time may vary between 20:00 and 20:59).
4. ARMED ONLY: The timer setting is only executed when the system is in
ARMED AWAY mode.
14. Make your choice and press OK. The display now reads NEW TIMER.
15. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for
No. If you choose Yes, you will quit the menu. If you choose No, you go back to the first
menu item.
7.9 Clearing the timer settings
1. To access the menu, press the menu UP or menu DOWN button. The display now
shows ENTER PIN.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code).
The display is cleared and shows a * for each number entered.
3. When the PIN code has been entered correctly, the word INSTALL will show up on
the display.
4. Use the menu buttons UP/DOWN to go to menu item 9. SET TIMER. Press OK to
select this menu item. You can also go to this menu item directly by pressing a 9 on the
number pad.
5. The display will read NEW TIMER.
6. Use the menu buttons UP/DOWN to check timers you set before. The timers are
shown in the following format: 12 ON 12:40
OFF 18:30
7. When a timer is shown, you can press CLEAR to delete the timer.
8. You need to confirm your choice (CLEAR TIMER). Press 1 for Yes and 2 for No.
9. Press CLEAR again to quit the menu.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce